Motorbikes

Correction Detail

Starting From £300

Ceramic coating is the perfect choice to help new motorbikes retain their just-new look and can revitalise the look of pre-owned motorbikes. Dirt is easily washed off, ensuring that treated motorbikes also stay looking cleaner for longer.

Correction Detail

what is
correction detailing?

If you are after perfection, the ‘Correction Detail’ is the perfect package option. This detail consists of multiple stages of paint correction, using cutting compounds to remove up to 90% of defects in the paint work, such as medium scratches or swirling, oxidation and dullness in the paintwork. The correction stage is then followed by the ‘Enhancement Detail’ to give huge depth and shine in the natural finish of the paintwork on your vehicle. The correction detail can potentially leave your motorbike looking better than when it was in the showroom.

intensive deep clean for the exterior

removes waxes, polishes and other surface contaminants

2 day booking

What’s included?

Just like within the ‘Enhancement detail’, this option can save you those bodyshop repair costs that you may think your vehicle needs, giving your pride a nd joy that new lease of life.

  • Wheels are sprayed with wheel cleaner and worked in with a soft bristle detailing brush
  • Tar removal treatment
  • Fallout remover used to remove iron deposits and staining such as brake dust
  • Wheels dried with warm air blower, glazed and protected with wheel sealant
  • Pre-wash citrus cleaner on lower parts of the car to remove road grime
  • Door shuts sprayed with APC, cleaned with a soft bristle detailing brush
  • Rinse
  • Pre-wash snow foam used and left to dwell to break down dirt
  • All ‘nooks and crannies’ cleaned with a soft bristle detailing brush
  • Rinse
  • 2 bucket method car wash, 1 panel at a time using a soft lambswool mitt, to help prevent swirling
  • Rinse
  • Tar deposits and contaminations attended to and removed using tar remover and fallout remover
  • Rinse
  • All paintwork and glass given the clay treatment to remove contaminants bonded to the paintwork, leaving a silky smooth finish
  • Final rinse
  • Vehicle dried with a fluffy microfibre drying towel
  • Paintwork assessed under high intensity lighting to show all defects
  • Paintwork is then further assessed using a paint depth gauge
  • All delicate areas such as rubber/plastic trims masked up
  • Multiple stages of correction, using cutting compounds
  • Headlights and taillights are corrected using multiple stages
  • IPA wipedown to remove polish oils
  • Vehicle washed again to remove any polishing residue/dust
  • Vehicle dried with a fluffy microfibre drying towel
  • Refinement polish is then completed to increase clarity and gloss in the paintwork
  • Final wipedown with IPA to prepare the vehicle for protection
  • Coating can be applied to the paintwork of the vehicle, (allowed to cure if necessary)
  • Plastic trim dressed and sealed
  • Windows cleaned inside and out
  • Windows polished
  • Rain repellent treatment applied to windows
  • Tyres cleaned and dressed
  • Exhaust tips polished
  • Chromes polished and sealed
Our work

Motorbike Portfolio

Get a Quote

FAQ

How long does a correction detail for motorbikes take?2022-05-25T10:17:30+00:00

Typically a Ceramic Coating will take 2 days to complete.

Times can vary depending upon the condition and size of your motorbike.

How much does a correction detail for motorbikes cost?2022-05-25T09:46:22+00:00

A correction detail on motorbikes start from £300 and increase depending upon the size and the condition of your bike.

get a free quote

2022-09-12T21:00:15+00:00
Go to Top